Jeep Dash Cubby Insert - Blank

$29.97

Are you annoyed by the “cubby” space provided by Jeep to replace the power window switch location? I have designed a custom insert to fill that hole with a usable surface to put switches, phone mounts or universal ball mounts from others like Bulletpoint or the Steelie Dash Mount by Nite Ize. It's a great space, close to power and stereo components, that you can now use!WHAT YOU’RE GETTINGA 3D printed “Blank” with dense infill on the front surface so you can drill your own holes or create your own ideas with the base starting point.
🛠️ You will have to make modifications to your cubby, such as drilling holes for switches and wiring, if you are going to use this for a switch location. You must also remove the OEM rubber mat before installing.PERSONALIZATION OPTIONS:
● Customize with up to 6 letters or numbers
● Text Colors: Gray, White, Green, Blue or Red
● Text can be printed at the top, middle or bottom of the insert (see listing picture)Specs:
-Color: Black
-Size: 2.5"x3"x3"
-Material: Strong ABS plastic with a textured front (looks OEM when mounted, not an aftermarket hack!)PLEASE NOTE
-No switches nor instructions for installing switches are provided by 4x3D.
-This insert will fit tight, as it locks into the same holes as the little rubber mat- so, if you push the blank insert into place before drilling any holes, you will likely have to remove the entire cubby to get the insert back out. If you need to do this, take a small screwdriver and push it out using the two holes on the bottom of the cubby used for the rubber mat that it came with. Just a heads up!
-There may be slight imperfections on the surface due to the 3D printing process.✔ Check out our other insert options here -->All items are printed to order and designed by me!
If you have any questions please reach out. Contact UsElevate Your Adventures 🏞

Jeep Dash Cubby Insert with 2 NiLight Switch Holes

$29.97

Are you annoyed by the “cubby” space provided by Jeep to replace the power window switch location? I have designed a custom insert with 2 NiLight rocker switch holes. Turn a wasted space into something you can actually use!Connect the rocker switches to control whatever you want to run…In my Jeep, I've connected switches to run my fog lights and ditch lights. They are in a great location and easy to access when I need them.AVAILABLE OPTIONS:
● Double (2 switch holes)
● Single (1 switch hole)Specs:
-Color: Black
-Size: Each hole is 36mm x 22mm (1.41” x 0.86”)
-Material: Strong ABS plastic with a textured front (looks OEM when mounted, not an aftermarket hack!)PLEASE NOTE
-No switches nor instructions for installing switches are provided by 4x3D.
-This insert will fit tight, as it locks into the same holes as the little rubber mat- so, if you push the insert into place, you will likely have to remove the entire cubby to get the insert back out. If you need to do this, take a small screwdriver and push it out using the two holes on the bottom of the cubby used for the rubber mat that it came with. Just a heads up!
-There may be slight imperfections on the surface due to the 3D printing process.✔ Check out our other insert options here -->All items are printed to order and designed by me!
If you have any questions or need a different color, please reach out. Contact UsElevate Your Adventures 🏞

Jeep Dash Cubby Insert with Bulletpoint Mount Holes

$29.97

Are you annoyed by the “cubby” space provided by Jeep to replace the power window switch location? I have designed a custom insert with holes for the Bulletpoint Universal Mount w/ 20mm Ball. Turn a wasted space into something you can actually use!::BULLETPOINT:: makes some rock-solid device mounts. I use their products in my own Jeep. (see bottom for link to Bulletpoint website)Specs:
-Color: Black
-Size: Universal Application Ball Assembly - Single Ball Mounting holes
-Material: Strong ABS plastic with a textured front (looks OEM when mounted, not an aftermarket hack!)PLEASE NOTE
-Bulletpoint Ball Mount not included.
-Instructions for installing mount are not provided by 4x3D.
-This insert will fit tight, as it locks into the same holes as the little rubber mat- so, if you push the insert into place, you will likely have to remove the entire cubby to get the insert back out. If you need to do this, take a small screwdriver and push it out using the two holes on the bottom of the cubby used for the rubber mat that it came with. Just a heads up!
-There may be slight imperfections on the surface due to the 3D printing process.HERE IS A LINK TO THE 20mm BALL MOUNT FROM BULLETPOINT → 20MM Adapter✔ Check out our other insert options here -->All items are printed to order and designed by me!
If you have any questions or need a different color, please reach out. Contact UsElevate Your Adventures 🏞

Jeep Dash Cubby Insert with 4 Round Rocker Switch Holes

$29.97

Are you annoyed by the “cubby” space provided by Jeep to replace the power window switch location? I have designed a custom insert with 4 round rocker switch holes. Turn a wasted space into something you can actually use!Connect the rocker switches to control whatever you want to run…In my Jeep, I've connected switches to run my fog lights, ditch lights and under hood work lights. They are in a great location and easy to access when I need them.Specs:
-Color: Black
-Size: Each hole is 20mm (0.78”)
-Material: Strong ABS plastic with a textured front (looks OEM when mounted, not an aftermarket hack!)PLEASE NOTE
-No switches nor instructions for installing switches are provided by 4x3D.
-This insert will fit tight, as it locks into the same holes as the little rubber mat- so, if you push the insert into place, you will likely have to remove the entire cubby to get the insert back out. If you need to do this, take a small screwdriver and push it out using the two holes on the bottom of the cubby used for the rubber mat that it came with. Just a heads up!
-There may be slight imperfections on the surface due to the 3D printing process.✔ Check out our other insert options here -->All items are printed to order and designed by me!
If you have any questions or need a different design, please reach out. Contact UsElevate Your Adventures 🏞

Jeep Dash Cubby Insert w/ 6 Micro Toggle Holes

$29.97

Are you annoyed by the “cubby” space provided by Jeep to replace the power window switch location? I have designed a custom insert with space for a customized name (up to 6 letters) and 6 micro toggles. Turn a wasted space into something you can actually use!In my personal 2012 Jeep JK, I connected the toggles to run my fog lights, ditch lights, under hood work lights and cubby backlight. The switches are now in a great location and I have a cool feature with my Jeep name!PERSONALIZATION OPTIONS:
● Customize with up to 6 letters or numbers
● Text Colors: Gray, White, Green, Blue or RedSpecs:
-Color: Black
-Size: Each hole is 6.5mm (0.25”)
-Material: Strong ABS plastic with a textured front (looks OEM when mounted, not an aftermarket hack!)PLEASE NOTE
-No switches nor instructions for installing switches are provided by 4x3D.
-This insert will fit tight, as it locks into the same holes as the little rubber mat- so, if you push the insert into place, you will likely have to remove the entire cubby to get the insert back out. If you need to do this, take a small screwdriver and push it out using the two holes on the bottom of the cubby used for the rubber mat that it came with. Just a heads up!
-There may be slight imperfections on the surface due to the 3D printing process.✔ Check out our other insert options here -->All items are printed to order and designed by me!
If you have any questions or need a different color, please reach out. Contact UsElevate Your Adventures 🏞

Hitch Receiver Cache

$27.99

Welcome to your new, must-have secret storage solution! The Hitch Receiver Cache (HRC) is the perfect place to store your valuables when you’re away from your ride.
Tired of the magnetic hide-a-key? The HRC will hold a spare key, no problem. And since it’s designed to mimic the hitch receiver, no one will even know it’s there! (Can’t say that about the magnetic box)WHAT SETS US APART⚡ Solid Construction - Thicker, more robust design than others on the market.⚡ Thoughtful Design - Don’t worry about having to jam your fingers into the small storage compartment, our HRC has a slide-out tray allowing you quick and easy access to your valuables. Measuring 1.25”x1.25”x3.5”, the tray is large enough to hold most standard car keys, fobs and money.
And, the protective cap will prevent dirt, dust and water from getting inside.⚡ Perfect Fit - Slides effortlessly into most 2” hitch receivers and is secured by a standard-sized hitch pin.⚡ High-Quality Material - Made from ABS plastic that is both UV resistant and tough enough for your most epic, off-road adventures!Specs:
-Color: Black
-Size: 2”x2”x7”
-Material: ABS plastic (UV Resistant & Durable)Please Note
Listing is for HRC only. No hitch pin or other hardware is included.
There may be slight imperfections on the surface due to the 3D printing process.All items are printed to order and designed by me!
If you have any questions or need a different design, please reach out... ContactElevate Your Adventures 🏞

Hitch Tube Cover - Wave

$23.97

Salute your fellow Jeeper with this "Jeep Wave" hitch tube cover! Simply slide this cover into your 2" hitch receiver and secure with a hitch pin.Great for you or as a gift to any Jeep lover you know!CHOOSE YOUR “JEEP WAVE” COLOR: Silver, White, Green, Blue or RedWHAT SETS US APART⚡ Solid Construction - Printed using one, single piece of durable plastic that will last for years.⚡ Thoughtful Design - Our covers are specially designed with drain holes to keep your receiver from collecting water or mud, all while keeping your receiver clean.⚡ Perfect Fit - Designed to fit most 2” hitch receivers and includes a “Rattle Arrester” designed to absorb any wiggle room between your hitch and the hitch cover.⚡ High-Quality Material - Made from premium, weather-resistant ABS plastic that is both UV resistant and tough.Specs:
-Color: Black
-Size: 3.5" x 3.5" x 3.75"
-Material: ABS plastic (UV resistant & durable)PLEASE NOTE
Hitch pin is NOT included.
There may be slight imperfections on the surface due to the 3D printing process.All items are printed to order and designed by me!
If you have any questions or need a different size or color, please reach out... ContactElevate Your Adventures 🏞

Baofeng Mount UV-5R

$19.97

Need a mounting solution for one of the most popular, off-road communication devices?
Check out this sleek, custom mount for the Baofeng UV-5R FSM radio - crafted with precision and practicality in mind. When mounted, the radio securely snaps into place, giving you peace of mind on even the toughest trails.WHAT SETS US APART⚡ Solid Construction - We created our mount to be one, single piece of durable plastic making it nearly indestructible.⚡ Diverse Mounting - 3 options available: attach to any flat surface using 2 mounting screws (55mm centers), secure it to roll bars or other surfaces using straps (20mm side slots) or mount with the 20mm ball adapter used in systems such as the Bulletpoint (attaches to the center mounting hole with an M5-8 button head bolt).⚡ Perfect Fit - Designed specifically for the Baofeng UV-5R, our mount keeps your radio secure- fear no trail!⚡ High-Quality Material - Made from ABS plastic that is UV resistant and tough.2 OPTIONS AVAILABLE:
● Mount Only
● Mount w/ 20mm Ball AdapterSpecs:
-Color: Black
-Size: 80mm x 58mm x 30mm
-Mounting Offset: 55mm
-Material: ABS (UV Resistant and Durable)Looking for the Baofeng UV-9G Mount? Click here → UV-9GPlease Note
Listing is for mount only. No radio or mounting hardware is included.
There may be slight imperfections on the surface due to the 3D printing process.All items are printed to order and designed by me!
If you have any questions or need a different design, please reach out... ContactElevate Your Adventures 🏞

Baofeng Mount UV-9G

$19.97

Need a mounting solution for one of the most popular, off-road communication devices?
Check out this sleek, custom mount for the Baofeng UV-9G GMRS, FSM radio - crafted with precision and practicality in mind. When mounted, the radio securely snaps into place, giving you peace of mind on even the toughest trails.WHAT SETS US APART⚡ Solid Construction - We created our mount to be one, single piece of durable plastic making it nearly indestructible.⚡ Diverse Mounting - 3 options available: attach to any flat surface using 2 mounting screws (55mm centers), secure it to roll bars or other surfaces using straps (20mm side slots) or mount with the 20mm ball adapter used in systems such as the Bulletpoint (attaches to the center mounting hole with an M5-8 button head bolt).⚡ Perfect Fit - Designed specifically for the Baofeng UV-9G, our mount keeps your radio secure- fear no trail!⚡ High-Quality Material - Made from ABS plastic that is UV resistant and tough.2 OPTIONS AVAILABLE:
● Mount Only
● Mount w/ 20mm Ball AdapterSpecs:
-Color: Black
-Size: 120mm x 60mm x 28mm
-Mounting Offset: 55mm
-Material: ABS (UV Resistant and Durable)Looking for the Baofeng UV-5R Mount? Click here → UV-5RPlease Note
Listing is for mount only. No radio or mounting hardware is included.
There may be slight imperfections on the surface due to the 3D printing process.All items are printed to order and designed by me!
If you have any questions or need a different design, please reach out... ContactElevate Your Adventures 🏞

FPV Drone Display Stand | Display Stand for Drone

$24.97

BLADE - your sleek, futuristic FPV drone stand.
Designed to make your drone appear suspended mid-flight; creating a captivating display of motion frozen in time.
Once assembled, BLADE becomes more than just a stand - it's a showcase, a conversation starter and a testament to your passion for FPV drones!🛠️ SOME ASSEMBLY REQUIRED
-To prevent shipping damage, your drone stand will come disassembled. (Phillips Head screwdriver required for assembly -- NOT INCLUDED)
-Instructions for assembly will be included.
-Your package will include the following:
● 3 x Body pieces
● 2 x M4x8 Phillip screws
● 2 x M3x6 Phillip screws
● 2x 20mm StandoffsSpecs:
Colors: Black, Red or Blue Gray
Size: Approx. 6"x6"x6"
Material: PLA plasticPLEASE NOTE
Drone/Quadcopter not included.
There may be slight imperfections on the surface due to the 3D printing process.All items are printed to order and designed by me!
If you have any questions or need a different color or design, please reach out... ContactElevate Your Adventures 🏞

Baofeng Mount UV-9G

$19.97

Need a mounting solution for one of the most popular, off-road communication devices?
Check out this sleek, custom mount for the Baofeng UV-9G GMRS, FSM radio - crafted with precision and practicality in mind. When mounted, the radio securely snaps into place, giving you peace of mind on even the toughest trails.WHAT SETS US APART⚡ Solid Construction - We created our mount to be one, single piece of durable plastic making it nearly indestructible.⚡ Diverse Mounting - 3 options available: attach to any flat surface using 2 mounting screws (55mm centers), secure it to roll bars or other surfaces using straps (20mm side slots) or mount with the 20mm ball adapter used in systems such as the Bulletpoint (attaches to the center mounting hole with an M5-8 button head bolt).⚡ Perfect Fit - Designed specifically for the Baofeng UV-9G, our mount keeps your radio secure- fear no trail!⚡ High-Quality Material - Made from ABS plastic that is UV resistant and tough.2 OPTIONS AVAILABLE:
● Mount Only
● Mount w/ 20mm Ball AdapterSpecs:
-Color: Black
-Size: 120mm x 60mm x 28mm
-Mounting Offset: 55mm
-Material: ABS (UV Resistant and Durable)Looking for the Baofeng UV-5R Mount? Click here → UV-5RPlease Note
Listing is for mount only. No radio or mounting hardware is included.
There may be slight imperfections on the surface due to the 3D printing process.All items are printed to order and designed by me!
If you have any questions or need a different design, please reach out... ContactElevate Your Adventures 🏞

Baofeng Mount UV-9G

$19.97

Need a mounting solution for one of the most popular, off-road communication devices?
Check out this sleek, custom mount for the Baofeng UV-9G GMRS, FSM radio - crafted with precision and practicality in mind. When mounted, the radio securely snaps into place, giving you peace of mind on even the toughest trails.WHAT SETS US APART⚡ Solid Construction - We created our mount to be one, single piece of durable plastic making it nearly indestructible.⚡ Diverse Mounting - 3 options available: attach to any flat surface using 2 mounting screws (55mm centers), secure it to roll bars or other surfaces using straps (20mm side slots) or mount with the 20mm ball adapter used in systems such as the Bulletpoint (attaches to the center mounting hole with an M5-8 button head bolt).⚡ Perfect Fit - Designed specifically for the Baofeng UV-9G, our mount keeps your radio secure- fear no trail!⚡ High-Quality Material - Made from ABS plastic that is UV resistant and tough.2 OPTIONS AVAILABLE:
● Mount Only
● Mount w/ 20mm Ball AdapterSpecs:
-Color: Black
-Size: 120mm x 60mm x 28mm
-Mounting Offset: 55mm
-Material: ABS (UV Resistant and Durable)Looking for the Baofeng UV-5R Mount? Click here → UV-5RPlease Note
Listing is for mount only. No radio or mounting hardware is included.
There may be slight imperfections on the surface due to the 3D printing process.All items are printed to order and designed by me!
If you have any questions or need a different design, please reach out... ContactElevate Your Adventures 🏞